Latest Flight Cases Now In Stock

Looking for a more professional way to move your tools around, we’ve got the answer for you here.

We now stock a variety of tool flight cases, with multiple options on how to kit them out. You can get just a simple case for loading your tools into, all the way up to a rally spec kit, coming complete with tools.

 

FLIGHT_CASE

Above is the Motamec Service Flight Case MTB-200. It comes complete with the foam lining seen above if you want it, as well as a kit needed to make your own cutaways for your tools.

External dimensions for these are 550mm x 400mm x 160mm (520mm x 370mm x 150mm internally).

FLIGHT_CASE_CUTOUT

As for colours of the case, you have the choice of either blue, green, red, or black. You also have five choices for the foam insert; grey, red, orange, green, or blue.


The next setup will be more suited to you if you have a lot more tools to carry around.

LINED_FLIGHT_CASE

This is the Motamec Service Flight Case MTB-100. It’s slightly smaller than the MTB-200 (external dimensions 490mm x 350mm x 195mm) but comes with two liners. Each liner has 24 elasticated grips on it to reduce the risk of your tools moving around and both of the liners sit comfortably into the top cover of the case, doubling the storage on the top and leaving you with the bottom half to fill with whatever you need.

If you don’t want to leave the bottom half of the case unorganized, then there is the option of getting the case with an additional, bespoke alloy tray.

FLIGHT_CASE_TRAY

As with the MTB-200 listed at the top of the post, this one also comes with the option of four different colours, blue, black, red, and green.


If you’re just getting started and need a good set of tools, or just need something to take on the road with you instead of your usual set, we’ve got an option for you too.

SPEC_CASE

SPEC_CASE_2

This is the Motamec Motorsport Tool Kit. It’s got the same dimensions as the MTB-200 case listed at the top, but comes with everything you see in it, and also comes in the same four colour options as the other two cases listed here, and the choice of either black and red, or gray and red foam insert. The full tool kit includes;

Motamec 18v Cordless Impact Wrench – Lithium-Ion – 430 ft/lb / 588Nm Torque
Spare Motamec 18v Battery – Lithium-Ion
Motamec 18v Battery Charger & Lead
10pc – 1/2 Drive Deep Impact Sockets
3pc – 1/2 Drive Deep Alloy Wheel Impact Sockets
1/2 Drive Breaker Bar
1/2 Drive Extension Bar
Ball Peen Hammer
Rubber Mallet
2 x Pry Bars
Heavy Duty Magnetic Pickup Tool
Locktite – Medium Strength
Tyre Pressure Gauge
Tyre Marking Pen
SMD Mini Work Light
LED / Pickup Tool
Wire Brush
CNC Cut Foam Inserts – Including 8 Spare Wheel Nut Slots (Wheel nuts not included).

 

All of the cases listed above are designed for professional use and are extremely hard wearing. They all comes with heavy duty ball corners and extruded aluminium edges to reduce impact damage. They all also have a 5mm thick stainless steel name plaque, come fully padded to prevent damage to your tools, and are all lockable.